Skip to content

Cart

Your cart is empty

NEW ARRIVALS + SYSTEM OF THE WEEK NEWSLETTER

Subscribe to receive updates, access to exclusive deals, and more... We promise not to give your info away.

Linn LP12 with Ittok Arm and New Sumiko Blue Point No.3 MC Cartridge

Sale price$0.00
Free Shipping on *ALL* Electronics (Excluding Speakers, Contiguous 48 US States Only)

Pickup currently unavailable at SkyFi 479

Linn Lp12 Wit Ittok Arm And New Sumiko Bluepoint No.3 Mc Cartridge Turntable

Linn LP12 with Ittok Arm and New Sumiko Blue Point No.3 MC Cartridge

SkyFi 479

Pickup currently unavailable

479 South Broad Street
Glen Rock NJ 07452
United States

+12018790000

Legendary Linn LP12 turntable in perfect working condition.

Every audiophile should own an LP12 at some point to experience its magic and ease of ownership. It's a no-nonsense table which is easy to setup and maintain.

Our best selling turntable with all the bits I would want on a stock LP12 including the electronic power supply, Ittok tonearm, and hinged dust cover.

We fitted a brand new Sumiko Blue Point No.3 high output MC cartridge which is an excellent match for the Ittok, and compatible with just about every phono preamp thanks to its high output.

Cosmetically this 'table is in very nice condition. The wood finish is lush and free from significant fading or discoloration, and the tonearm is intact. The cover has the usual light scratches and swirls but nothing too bad.

You can also select from any other cartridge in our inventory, just drop us a note.

Recommended Cables:

Kimber Kable - Phono Interconnects - Better

Kimber Kable - Flagship Tonearm Interconnects - Best

The SkyFi Testing Process for Turntables:

First we try to identify any mechanical issues, particularly in the tonearm bearings. We check for freedom of movement or any resistance on both the horizontal and vertical range. There is a quick test for this which involves placing the table on its front edge and allowing the arm to swing freely like a pendulum. We then make any adjustments necessary to achieve minimal resistance and sometimes adjust the bearing pressure. On gimbal tonearms we inspect the cone tip with a magnifier.

We then asses the platter speed by using one of several methods, the most accuse is a playing a test tone on a test record and measuring the frequency out put with a frequency counter or oscilloscope. We also utilize test equipment to measure the wow and flutter to ensure its within spec. We do this for all speeds available for that particular model. Adjustments are then made to achieve proper speed which will vary depending on table drive design. Some require an adjustment of an internal or external potentiometer, some will require a pulley or motor adjustment. We also inspect the platter bearing to ensure its properly lubricated keeping in mind that some don't require lubrication at all.

We then inspect the power supply and address any issues with overworked capacitors particularly on Linn and later Thorens machines which tend to need attention.

On fully mechanical vintage tables like the Thorens TD124 and Garrard 301/401 we will go thought the entire mechanism, replace any worn parts and lubricate all components necessary to ensure smooth operation, speed change and low mechanical noise.

When fitting a new cartridge we will go through our detailed calibration process which can involve as many as 12 steps depending on the arm design. We perform this work on our custom turntable calibration rig which was developed in-house.

Some of these steps include:

Pivot to spindle adjustment

Tracing force

Anti-skate

Tonearm height

Lifter height

VTA

Azimuth

Stylus Distance and Overhang

We then do a critical listening test using our test records and our test system to ensure proper sonics.

Item

Included

Original Box

Not Included

Manual

Not Included

Remote

Not Applicable

Cables

Yes - Power Only

Physical Condition (Info Here)

8 / 10

Working Condition

10 / 10

SKU: 104279