Wilson Audio Watt/Puppy Series 6 - Complete Set - Fully Restored

Free Shipping on *ALL* Electronics (Excluding Speakers, Contiguous 48 US States Only)

General:
The Wilson Watt/Puppy is a speaker that every serious audiophile should hear and own at some point. If you can't swing the $38,500 for the newly released version, this is a fantastic value.

They sound really amazing and have won countless awards over the years.

This set of Series 6 had all four of its bass woofers re-foamed by the experts at Millersound. We also purchased two new matching tweeters from Wilson which are the upgraded version. In addition, we replaced all of the baffle foam on all 4 cabinets as well as the protective fuses/resistors at no small expense.

Then to make them a bit more manageable we installed a set of perfectly fitting rolling floor casters which can be replaced with the included spikes or feet.  

They are now in perfect working order, even better than original due to the new tweeters. and are ready to be enjoyed. 

Include with your purchase is original manual, accessory kit, and shipping crates.

We can ship these anywhere within the lower 48 US States for a flat $900. If you're outside of this area please contact us for a quote as we ship worldwide. Local courier is also available within 50 miles of our Zip 02861, and local pickup from our shop is also welcome.

SkyFi Cosmetic Notes:
Some minor scratches and marks on sides but overall very well preserved condition.

Brand Background:
Wilson Audio Specialties Inc. (commonly referred to as Wilson Audio) is an American high-end audioloudspeaker manufacturing company, located in Provo, Utah.

Ownership:
Single Owner

Connections:
Speaker Binding Posts

General Sound:
Big beautiful musical sound with little fatigue.

Cosmetic Condition:
8/10 = Very Good. Excellent front faceplate, one minor flaw on chassis side or top. See our detailed rating description here.

Working Condition:
Working perfectly and tested in our lab and listening room.

Included:
Complete Kit as it Left the Factory

Packing:
Original Manufacturers Packing

Reviews:
Click Here

Specs:
Nominal Impedance: 
4 ohms

Drivers - Each Speaker:
Woofer: 2 x 8 inch
Midrange: 1 x 7 inch 
Tweeter: 1 x 1 inch inverted titanium dome

Sensitivity: 
92 dB (1W at 1 meter)

Minimum Amplifier Power:
7W per channel

Frequency Response:
21 Hz to 21 kHz, -3dB

Dimensions - Each Speaker:
40" H, 12.25" W, 18.5" D

Weight - Each Speaker:
170 lbs.

Approximate Age:
2000

Link to Manual:
Click Here

Recommended Cables:
Kimber Kable - Speaker Cables - Good

Kimber Kable - Speaker Cables - Better

Testing Process:
Our speaker evaluation process starts with a visual inspection of all drivers. We are looking for damaged or deteriorating woofer surrounds, dented tweeter domes, and cone damage. We also inspect the speaker connection points for loose or broken connectors.

After the initial visual inspection we connect the speakers to a reference amplifier with our preferred test tracks. With the speakers placed with proper distance we listen to each driver to make sure that they are producing the intended frequencies with no signs of distortion or rattle.

During listening tests with test tracks we check for proper stereo imaging and bass response at various listening levels. If there are any audible signs of issues, the speakers are taken to the bench where we perform a frequency sweep to isolate the issue so that it can be resolved by component repair or replacement.

Our subwoofer evaluation process starts with a visual inspection of all drivers. We are looking for damaged or deteriorating woofer surrounds, cone damage, or rubbing voice coils. We also inspect the input connections for damage.

After the initial visual inspection we connect the sub at our bench and perform a sine wave sweep from about 200 Hz down to around 10 Hz. During this sweep we are listening for excessive rattle or other signs of improper function.

If the sweep passes we then increase the input level to evaluate how the woofer performs at high output levels. If the woofer has built-in crossover adjustments or multiple connection options these features are tested at this time.

We complete the subwoofer evaluation by feeding the unit with an audio signal in conjunction with our house music system to see how it responds to low frequency content in real world conditions while paired with a full range system.