Spectral Audio DMA-90 High Resolution Amplifier - Complete Set

$2,499

It's rare to find a DMA-90 in a complete set including the box and manual that looks and works this well.

Actually most Spectral pieces actually require little to no work when they arrive at SkyFi. A true testament to their build quality, parts selection, and attention to detail.

This DMA-90 was no exception, testing incredibly clean in the test bench, and reproducing our test discs faithfully and without drama.

In very good condition with slight signs of use.

At the time of this writing we have two units from the same system available. Perfect if you'd like to assemble a monoblock setup.

Click here for overall amplifier details 

Click here for technical specifications

The SkyFi Testing Process for Solid State Amplifiers:

We start with a visual inspection of all internal components to make sure there are no signs of stress or aging. Capacitors are checked for telltale sings of bulging or leaking, resistors are checked for signs of overheating or cracking, and transistors are checked for signs of stress or damage.

We then power up the unit carefully and run a simple 1k sine wave while monitoring the output on an oscilloscope for signs of distortion or noise. Finally, we run the amplifier to its full rated power into the appropriate resistive load provided by our Sencore amplifier tester. If there is an issue, it will usually be noticeable at this point. If everything reads clean, we will often test for THD (Total Harmonic Distortion) measured by our Keithley distortion meter, and compare it against the original manufacturers specifications. The amplifier then remains powered on to "burn in" on our test bench for a few hours to make sure there are no heat related issues. If there are balanced inputs available they will be also be tested.

Final testing involves pushing actual music thorough the amplifier. We've learned over time that some issues are only noticeable to a trained ear while listening to familiar source material. Our test bench has reference vintage KEF speakers that we're very familiar with which quickly reveal any discrepancies. Some amplifiers will then move into our listening room where they are tested with our in-house reference speakers of choice.

Please click here for detailed specifics regarding our specialized packing process that separates us from the rest.

Item

Included

Original Box

Yes

Manual

Yes

Remote

N/A

Cables

Yes - Power

Physical Condition

7

Working Condition

10

Recently viewed