Sonus Faber Amati Tradition Speakers in Wenge - Gorgeous and Like New!

Free Shipping on *ALL* Electronics (Excluding Speakers, Contiguous 48 US States Only)

General:

Stunning speaker oozing of Italian craftsmanship, aesthetic, and execution.

Best of all, unlike other hyper-realistic speakers in this price range the Amatis will reward you with warm, non-fatiguing, yet highly precise music.

Tons of bass, hair tingling mids, and silky highs are what we hard from these speakers.

The finish is a high gloss Wenge which has a warm brown hue likely to blend with most furniture and decor.

Best of all they came from the original owner who took incredible care of them and come complete with every bit like they left the factory. The are impeccable with no signs of use or abuse despite the high gloss finish and delicate wood.

Since we have the original boxes these can be also shipped worldwide. 

MSRP:

$30,000.00

Review:

Click Here

Specs:

SYSTEM

3.5 way, full para-aperiodic vented box “Stealth Ultraflex” system and “Zero Vibration Transmission” technology

LOUDSPEAKERS

Tw: H28 XTR-04 DAD Arrow Point, Ø 28 mm

Md: M15 XTR-04 Neodymium Magnet System, Ø 150 mm

W: 2 x W22XTR-08, Ø 220 mm

CROSSOVER

80Hz - 250Hz – 2.500Hz

FREQUENCY RESPONSE

28 Hz – 35.000 Hz, Stealth reflex included

SENSITIVITY

90 db SPL (2.83V/1 m)

NOMINAL IMPEDANCE

4 ohm

SUGGESTED AMPLIFIER POWER OUTPUT

100W – 500W, without clipping

DIMENSIONS (H x W x D) - Each

1176 x 411 x 512 mm

46.3" x 16.2" x 20.1"

WEIGHT - Each

61 Kg – net weight

134.5 lb – net weight

Link to Manual:

Click Here

Recommended Cables:

Kimber Kable - Speaker Cables - Better

Kimber Summit Series Monocle XL Speaker Cables (PAIR) - Best

Kimber Summit Series BiFocal XL Bi-Wire Speaker Cables (PAIR) - Best If Applicable 

The SkyFi Testing Process for Speakers:

Our speaker evaluation process starts with a visual inspection of all drivers. We are looking for damaged or deteriorating woofer surrounds, dented tweeter domes, and cone damage. We also inspect the speaker connection points for loose or broken connectors.

After the initial visual inspection we connect the speakers to a reference amplifier with our preferred test tracks. With the speakers placed with proper distance we listen to each driver to make sure that they are producing the intended frequencies with no signs of distortion or rattle. During listening tests with test tracks we check for proper stereo imaging and bass response at various listening levels. If there are any audible signs of issues, the speakers are taken to the bench where we perform a frequency sweep to isolate the issue so that it can be resolved by component repair or replacement.