ProAc Super Tablette Bookshelf Speakers - Survivors

Free Shipping on *ALL* Electronics (Excluding Speakers, Contiguous 48 US States Only)

General:
Super well regarded and diminutive speaker from the British maker Proac. One of our favorite bookshelf speakers apart from the Response 1.

Well cared for and in very good condition for their age with some light scratches on the top surfaces. 

Drivers are all intact and looking like new. Working perfectly without a single issue.

Will work beautifully with 20-80 watts.

Silky smooth highs and punchy bass, much more than you would expect in this size speaker.

*These speakers will ship for free via UPS Ground anywhere within the lower 48 US States. 

Ownership:
Single Owner

Cosmetic Condition:
8. See our detailed rating description here.

Working Condition:
Working perfectly and tested in our lab and listening room.

Recommended Cables:
Kimber - Click Here

Specs:
Tweeter:
3/4″ ferrofluid cooled

Driver:
4″ cone woofer 

Frequency Response:
70 Hz to 20 kHz

Nominal impedance:
8 ohms

Sensitivity:
84 dB

Dimensions - Each Speaker:
6" W x 10.5" H x 9" D

Testing Process:

Our speaker evaluation process starts with a visual inspection of all drivers. We are looking for damaged or deteriorating woofer surrounds, dented tweeter domes, and cone damage. We also inspect the speaker connection points for loose or broken connectors.

After the initial visual inspection we connect the speakers to a reference amplifier with our preferred test tracks. With the speakers placed with proper distance we listen to each driver to make sure that they are producing the intended frequencies with no signs of distortion or rattle. During listening tests with test tracks we check for proper stereo imaging and bass response at various listening levels. If there are any audible signs of issues, the speakers are taken to the bench where we perform a frequency sweep to isolate the issue so that it can be resolved by component repair or replacement.

Our subwoofer evaluation process starts with a visual inspection of all drivers. We are looking for damaged or deteriorating woofer surrounds, cone damage, or rubbing voice coils. We also inspect the input connections for damage.

After the initial visual inspection, we connect the sub at our bench and perform a sine wave sweep from about 200Hz down to around 10Hz. During this sweep we are listening for excessive rattle or other signs of improper function. If the sweep passes, we then increase the input level to evaluate how the woofer performs at high output levels. If the woofer has built in crossover features or multiple connection options these features are tested at this time.

We complete the subwoofer evaluation by feeding the unit with an audio signal in conjunction with our house music system to see how it responds to low frequency content in real world conditions while paired with a full range system.