Pro-Ject Xtension 10 Turntable with Mahogany Plinth and NEW Sumiko Cartridge - DEMO Unit

Free Shipping on *ALL* Electronics (Excluding Speakers, Contiguous 48 US States Only)

This is a gorgeous Xtension 10 in a high-gloss Mahogany finish.

This 'table was a demo unit and had an easy life. It show no signs of wear and is working like the day it left the factory. Best of all it wil come with a full manufacturers warranty (SkyFi is an official Pro-Ject Dealer).

Included with your purchase is a brand new Sumiko Songbird MC/Moving-Coil phono cartridge ($899 not pictured), but you can choose from our vast inventory of Sumiko cartridges to fit any price range. We'll take care of installing and calibrating the cartridge for you (a $399 Value) using our very detailed 11 step calibration process. You can also send in you own cartridge for calibration. 

To take this table to the next level we suggest adding this cable from Kimber: TAK-CU - New Speciality Series Tonearm Cable

More from Pro-Ject:
The Xtension 10 shares much with its larger brother the Xtension 12. Designed to be smaller and with a 10″ tonearm, the Xtension 10 delivers nearly all of the 12’s performance in a more compact and less expensive package. Pro-Ject’s Xtension 10 incorporates over 20 years of experience in turntable design and manufacture. The Xtension 10 represents the latest technological efforts to address mass-decoupling and resonance reduction. Beginning with the mass-loaded magnetically floated sub-chassis and the precision balanced sandwich alloy platter (recycled vinyl/alloy), the foundation of this system weighs in at a super-heavy 48 lbs.

Additionally, Pro-Ject employs magnetic decoupling feet to thwart airborne or mechanical vibration from disturbing playback. This mass and isolation creates an environment of extremely low resonance, allowing music to emerge from an ultra-silent black background. An AC motor with a two-step pulley drive with electronic speed control maintains perfect pitch and rhythm, resulting in inaudible wow, flutter and noise.

Further reducing noise and vibration is the isolated Sorbothane mounting board for the 10″ carbon-fiber tonearm. The conical arm and unified headshell are fabricated from a single piece of carbon fiber to avoid problems associated with standing wave reflections. Single screw fixing of the armtube allows easy rotation for adjustment of needle azimuth.

Great review from Mr. Fremer: "The Pro-Ject Xtension10 Turntable— More Than a "Lifestyle" Product!"

"The Pro-Ject Xtension10 gives you a suspended mass-loaded turntable featuring a well-damped, attractive gloss-finished veneer plinth in a choice of three woods, a 12.5 pound alloy platter, a nicely done ceramic ball topped bearing, a built in quartz synthesized speed controller driving an A.C. synchronous motor, a 10” carbon fiber arm set in a high mass bearing housing featuring ABEC7 bearings and a dust cover. A good deal in my book."

Please click here for detailed specifics regarding our specialized packing process that separates us from the rest.