Skip to content


Your cart is empty


Subscribe to receive updates, access to exclusive deals, and more... We promise not to give your info away.

Bowers & Wilkins HTM4 D2 Diamond Center Channel In Gloss Black

Sale price$0.00
Free Shipping on *ALL* Electronics (Excluding Speakers, Contiguous 48 US States Only)

Pickup currently unavailable at SkyFi 479

Bowers & Wilkins Htm4 D2 Diamond Center Channel In Gloss Black Reczhufeta7Kaa1Dd

Bowers & Wilkins HTM4 D2 Diamond Center Channel In Gloss Black

SkyFi 479

Pickup currently unavailable

479 South Broad Street
Glen Rock NJ 07452
United States


HTM4 D2 Diamond series center speaker from Bowers and a perfect match to your 800 series speaker regardless of the series.

Finished in gloss black which was the most common color for much of the 800 series.

In very clean condition with no signs of wear or abuse. Tested and working brilliantly.

Includes jumpers in case you don't want to bi-wire, plus the original box to ensure safe transport.

Recommended Cables:

Kimber Kable - Speaker Cables - Good

Kimber Kable - Speaker Cables - Better

Kimber Kable - Bi-Wire Speaker Cables - Best 

Enclosure type:

Port (bass reflex) location:
42Hz (measured at -6dB) - 33kHz

Frequency range:
50 W - 120 W

Recommended power:
88 dB at 2.83V/1m

8 ohms

Nominal impedance:
4.7 ohms

Minimal impedance:

Number of drivers:

Woofer / Midbass, Tweeter

Woofer/Midbass Size:
1 x 6.5 in

Woofer/Midbass cone material:
Kevlar / Glass Fiber / Carbon Fiber

Tweeter Size:
1 x 25.4 mm

Tweeter type:
(Soft) dome

19.1" x 11" x 11.3"

27 lbs

The SkyFi Testing Process for Speakers:

Our speaker evaluation process starts with a visual inspection of all drivers. We are looking for damaged or deteriorating woofer surrounds, dented tweeter domes, and cone damage. We also inspect the speaker connection points for loose or broken connectors.

After the initial visual inspection we connect the speakers to a reference amplifier with our preferred test tracks. With the speakers placed with proper distance we listen to each driver to make sure that they are producing the intended frequencies with no signs of distortion or rattle. During listening tests with test tracks we check for proper stereo imaging and bass response at various listening levels. If there are any audible signs of issues, the speakers are taken to the bench where we perform a frequency sweep to isolate the issue so that it can be resolved by component repair or replacement.



Original Box

Yes Included


Not Included


Not Applicable


Pair of Short Jumpers

Physical Condition (Info Here)

8 / 10

Working Condition

10 / 10

SKU: 104397