Bowers & Wilkins Nautilus 803 Speakers in a Stunning Red Stained Cherrywood

Please note these are listed for local pickup only from our shop in Glen Rock, NJ 07452. 

Slightly larger and fuller in depth of sound than the Nautilus 804's at virtually the same footprint, this speaker is still relevant with today's music and amplifiers. 

In good condition with a few light scuffs. Nothing too noticeable as you can see from our photos.  

Sequential Serial #'s 008133 & 008134

Grills are included and are in fair/good overall condition as shown in our photos.

They're both in absolutely perfect working condition, and were fully tested in our auxiliary listening room as pictured. 

This listing includes the original speaker grills, spikes as pictured, and the original manual. Nothing else is included that is not shown in our photos or mentioned here.

Click below to add our recommended matching cables from Kimber Kable, all brand new as SkyFi is an official Kimber dealer. 

Kimber Kable - Speaker Cables - Good

Kimber Kable - Speaker Cables - Better

Kimber Kable - Bi-Wire Speaker Cables - Best if Applicable

Specifications:
3-way vented-box system

Technical Features:
Nautilus tweeter
Kevlar brand fibre cone FST drive unit
Matrix cabinet
Flowport

Drive Units:
1x 25mm (1 in) metal dome high-frequency
1x 150mm (6in) woven Kevlar cone FST midrange
2x 180mm(7in)paper/Kevlar conebass

Frequency Response:
42Hz – 20kHz ± 2dB on reference axis

Sensitivity:
90dB spl (2.83V, 1m)

Nominal Impedance:
8Ω (min 3.0 Ω)

Crossover Frequencies:
350Hz and 4kHz

Power Handling:
50W - 250W into 8 ohm on unclipped programme

Dimensions:
Height: 1064mm (41.9 in)
Width: 285mm (11.2 in)
Depth: 431mm (17.0 in)

Net Weight:
30.0kg (66 lb)

Click here for a PDF copy of the original Spec Sheet

Click here for a PDF copy of the original Owner's Manual