Bowers & Wilkins B&W ASW 700 Subwoofer in Cherry 10" 500 Watts
Free Shipping on *ALL* Electronics (Excluding Speakers, Contiguous 48 US States Only)
Pickup currently unavailable at SkyFi 479
Bowers & Wilkins B&W ASW 700 Subwoofer in Cherry 10" 500 Watts
SkyFi 479
479 South Broad Street
Glen Rock NJ 07452
United States
This great sub arrived as part of a 3.1 system including left center and right speakers.
We tested it carefully and confirmed it in full working order. It did not need any other attention from as as with most B&W products.
Note this is a line level sub meaning you need to connect it with RCA cables from your preamp or processor. No speaker cable input.
Cosmetic Notes:
- Light blemish on one bottom corner
- Minor wear throughout
Brand Background:
Excellence, uncompromised and uncompromising. The world’s most famous recording studios demand Bowers & Wilkins 800 Series loudspeakers, for no other reason than they represent the pinnacle of sonic supremacy.
Ownership:
Single Owner
Connections:
RCA inputs, IEC power cord
Cosmetic Condition:
7/10 = Good. One or two minor scratches. Well Maintained.. See our detailed rating description here.
Working Condition:
Working perfectly and tested in our lab and listening room.
Included:
Just the unit and power cord.
Weight:
50 lbs.
Recommended Cables:
Kimber Kable - RCA Interconnects - Better
Testing Process:
Our speaker evaluation process starts with a visual inspection of all drivers. We are looking for damaged or deteriorating woofer surrounds, dented tweeter domes, and cone damage. We also inspect the speaker connection points for loose or broken connectors.
After the initial visual inspection we connect the speakers to a reference amplifier with our preferred test tracks. With the speakers placed with proper distance we listen to each driver to make sure that they are producing the intended frequencies with no signs of distortion or rattle. During listening tests with test tracks we check for proper stereo imaging and bass response at various listening levels. If there are any audible signs of issues, the speakers are taken to the bench where we perform a frequency sweep to isolate the issue so that it can be resolved by component repair or replacement.
Our subwoofer evaluation process starts with a visual inspection of all drivers. We are looking for damaged or deteriorating woofer surrounds, cone damage, or rubbing voice coils. We also inspect the input connections for damage.
After the initial visual inspection, we connect the sub at our bench and perform a sine wave sweep from about 200Hz down to around 10Hz. During this sweep we are listening for excessive rattle or other signs of improper function. If the sweep passes, we then increase the input level to evaluate how the woofer performs at high output levels. If the woofer has built in crossover features or multiple connection options these features are tested at this time.
We complete the subwoofer evaluation by feeding the unit with an audio signal in conjunction with our house music system to see how it responds to low frequency content in real world conditions while paired with a full range system.
Choose options