Skip to content

Cart

Your cart is empty

NEW ARRIVALS + SYSTEM OF THE WEEK NEWSLETTER

Subscribe to receive updates, access to exclusive deals, and more... We promise not to give your info away.

AudioQuest River Series Mackenzie XLR Audio Interconnects - 3 Meter

Sale price$0.00
Free Shipping on *ALL* Electronics (Excluding Speakers, Contiguous 48 US States Only)

Pickup currently unavailable at SkyFi 479

Audioquest River Series - Mackenzie Xlr Audio Cable 3 Meter Recftpkbzc4Fmdjzk

AudioQuest River Series Mackenzie XLR Audio Interconnects - 3 Meter

SkyFi 479

Pickup currently unavailable

479 South Broad Street
Glen Rock NJ 07452
United States

+12018790000

General:

Mackenzie Analog Audio Cable pair with XLR connectors at both ends. 3 meters in length. 

$599 MSRP

More from AudioQuest:

"Originally named Disappointment for dashing Alexander Mackenzie’s hope that it would lead to the Pacific rather than the Arctic Ocean, the Mackenzie River is Canada’s largest, longest river system. Traversing 2,635 miles, it flows through a vast network of lakes, boreal forests and arctic tundra. Mackenzie’s many tributaries cover portions of three provinces—British Columbia, Alberta, and Saskatchewan—and two territories, Yukon and the Northwest Territories. Known as “The Amazon of the North,” Mackenzie’s sparsely populated basin remains one of the great unspoiled natural areas in the world."

SOLID PERFECT-SURFACE COPPER+ (PSC+) CONDUCTORS

Solid conductors prevent both electrical and magnetic interaction strand-to-strand interaction, major sources of distortion. Surface quality is critical because a conductor can be considered as a rail-guide for both the fields within a conductor, and for the magnetic fields that extend outside the conductor. The astonishingly smooth and pure surface of all AudioQuests’s Perfect-Surface metals nearly eliminates harshness and greatly increases clarity compared to lesser materials. Extremely high-purity Perfect-Surface Copper+ further minimizes distortion caused by grain boundaries, which exist within any metal conductor, nearly eliminating harshness and greatly increasing clarity compared to OFHC, OCC, 8N and other coppers.

TRIPLE-BALANCED GEOMETRY (SEPARATE GROUND-REFERENCE CONDUCTOR)

Our Triple-Balanced Geometry uses a separate ground-reference conductor, so the cable's shield is never used as an inferior conductor. Whether prepared with RCA or XLR plugs, the cable's three conductors ensure that the positive and negative signals have equally superior, low-distortion conducting paths.

COLD-WELDED, HANGING-SILVER DIRECTLY OVER PURE PURPLE COPPER TERMINATIONS

Cold-Welded, Hanging-Silver Directly Over Pure Purple Copper Terminations

HARD-CELL FOAM INSULATION

Hard-Cell Foam (HCF) Insulation ensures critical signal-pair geometry. Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Hard-Cell Foam Insulation is similar to the Foamed-PE used in our more affordable Bridges & Falls cables, and is nitrogen-injected to create air pockets. Because nitrogen (like air) does not absorb energy and therefore does not release any energy from or into the conductor, distortion is reduced. In addition, the stiffness of the material allows the cable's conductors to maintain a stable relationship along the cable's full length, producing a stable impedance character and further minimizing distortion.

CARBON-BASED 3-LAYER NOISE-DISSIPATION SYSTEM (NDS)

It's easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. NDS's alternating layers of metal and carbon-loaded synthetics "shield the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.

The SkyFi Testing Process for Cables:

We start with a visual inspection of each connector to make sure there is no corrosion, broken components or frayed wiring. We then check the length of cable to make sure it has not been compromised at and the conductors are intact. We then check the cable for continuity with our specialized test right that identifies, short and open condition. We then clean the cable and prepare it for photos.

Item

Included

Original Box

Not Included

Manual

Not Applicable

Remote

Not Applicable

Cables

As Pictured

Physical Condition (Info Here)

8 / 10

Working Condition

10 / 10

 

SKU: 104192