Wilson Audio Sasha Watt Puppy Series 2 Speakers - with Original Crates and Accessories

Free Shipping on Most Electronics - Excludes Speakers and Items Requiring Freight - Contiguous U.S. Only

General:
The Wilson Audio Sasha W/P Series 2 is part of Wilson’s well-known Watt/Puppy lineage and is respected for its engineering, build quality, and full-range performance.

Sasha utilizes Wilson’s two-module architecture, separating the WATT upper enclosure (midrange and tweeter) from the Puppy bass module, which allows for precise time alignment and excellent imaging. The result is a highly detailed presentation with strong bass extension and impressive dynamics. 

Original MSRP on these beauties was a whopping $30,000 a pair. Serial numbers indicate 3639 and 3640. 

This pair was tested in our listening area and they are working beautifully. They're finished in silver with an automotive-grade paint finish that presents very well. This is in our opinion the best color for these speakers.

Another great feature of the Sasha is that they're efficient at 92 dB (per one watt at one meter at 1 kHz). This allows them to pair well with lower power amplifiers equally as well as more powerful equipment. 

Included with the speakers will be the original accessories, owner’s manual, and three total original shipping crates.

These will ship free within the lower US 48 states via truck freight. Local pickup welcome, and if you're outside of this area contact us for a quote as we can ship these worldwide. Local courier also available within about 50 miles of our zip code 07452 for an additional fee.

SkyFi Cosmetic Notes:
Some minor scratches on the cabinet which we've pointed out in the listing pictures. Overall condition is very good.

Brand Background:
Wilson Audio Specialties Inc. (commonly referred to as Wilson Audio) is an American high-end audioloudspeaker manufacturing company, located in Provo, Utah.

Ownership:
Second Owner

Connections:
Speaker Binding Posts

General Sound:
Smooth, uncolored, undistorted natural and clean

Cosmetic Condition:
8/10 = Good. One or two minor scratches. Well Maintained. See our detailed rating description here.

Working Condition:
Working perfectly and tested in our lab and listening room.

Included:
Exactly as pictured and described above.

Packing:
Original Manufacturers Packing

Original MSRP:
$30,000.00

Specs:
Sasha Series 2 Technical Specifications
Released: 2014   
Retired: 2018

Drivers
Woofers
Two - 8 in. (20.32cm)

Midrange
One - 7 in. (17.78 cm)

Tweeter
One - 1 in. Dome (2.54 cm)

Enclosures & Materials
Enclosure Type, Upper
Rear Ported Midrange, X & S-Material

Enclosure Type, Woofer
Rear Ported Woofer, X-Material

Measurements
Sensitivity
92 dB (one watt at one meter at 1 kHz)

Nominal Impedance
4 ohms / minimum 2.17 ohms @ 90 Hz

Minimum Amplified Power
20 watts per channel

Dimensions - Each Speaker:
Height
45 1/8 in. (114.61 cm)

Width
14 in (35.56 cm)

Depth
22 1/8 in (56.24 cm)

Weight - Each Speaker:
400 lbs.

Approximate Age:
2014

Link to Manual:
Click Here

Recommended Cables:
Kimber Kable - Speaker Cables - Good

Kimber Kable - Speaker Cables - Better

Kimber Kable - Bi-Wire Speaker Cables - Best

Testing Process:
Our speaker evaluation process starts with a visual inspection of all drivers. We are looking for damaged or deteriorating woofer surrounds, dented tweeter domes, and cone damage. We also inspect the speaker connection points for loose or broken connectors.

After the initial visual inspection we connect the speakers to a reference amplifier with our preferred test tracks. With the speakers placed with proper distance we listen to each driver to make sure that they are producing the intended frequencies with no signs of distortion or rattle.

During listening tests with test tracks we check for proper stereo imaging and bass response at various listening levels. If there are any audible signs of issues, the speakers are taken to the bench where we perform a frequency sweep to isolate the issue so that it can be resolved by component repair or replacement.

Our subwoofer evaluation process starts with a visual inspection of all drivers. We are looking for damaged or deteriorating woofer surrounds, cone damage, or rubbing voice coils. We also inspect the input connections for damage.

After the initial visual inspection we connect the sub at our bench and perform a sine wave sweep from about 200 Hz down to around 10 Hz. During this sweep we are listening for excessive rattle or other signs of improper function.

If the sweep passes we then increase the input level to evaluate how the woofer performs at high output levels. If the woofer has built-in crossover adjustments or multiple connection options these features are tested at this time.

We complete the subwoofer evaluation by feeding the unit with an audio signal in conjunction with our house music system to see how it responds to low frequency content in real world conditions while paired with a full range system.