Thiel CS2.2 Full Range Floorstanding Speakers - Super Clean

Free Shipping on *ALL* Electronics (Excluding Speakers, Contiguous 48 US States Only)

The Thiel CS2.2 is a 3-way floorstanding speaker with a passive radiator.

A passive radiator gives you a great amount of bass from a limited size cabinet, while also assisting the main woofer.

At the top you'll find a very capable midrange and aluminum tweeter.

The sloped designs develop perfect time alignment which results in incredible imaging.

The finish is a gorgeous medium oak which will look great in most living rooms.

These speakers were tested in our lab and in our listening room where they sounded terrific. Really big sound for their footprint. Very responsive and great bass response. 

Note speaker terminal connectors are on bottom so you cannot use bananas.

These are available for local pickup only. You're also welcome to arrange your own freight or courier such as U-Ship or Roadie.

Click below to add our recommended matching cables from Kimber Kable, all brand new as SkyFi is an official Kimber dealer.

Kimber Kable - Speaker Cables - Better

Kimber Summit Series Monocle XL Speaker Cables (PAIR) - Best

Kimber Summit Series BiFocal XL Bi-Wire Speaker Cables (PAIR) - Best If Applicable 

The SkyFi Testing Process for Speakers:
Our speaker evaluation process starts with a visual inspection of all drivers. We are looking for damaged or deteriorating woofer surrounds, dented tweeter domes, and cone damage. We also inspect the speaker connection points for loose or broken connectors.

After the initial visual inspection we connect the speakers to a reference amplifier with our preferred test tracks. With the speakers placed with proper distance we listen to each driver to make sure that they are producing the intended frequencies with no signs of distortion or rattle. During listening tests with test tracks we check for proper stereo imaging and bass response at various listening levels. If there are any audible signs of issues, the speakers are taken to the bench where we perform a frequency sweep to isolate the issue so that it can be resolved by component repair or replacement.

Specifications:
Three-way, passive bass radiator-loaded (reflex), floor-standing loudspeaker.

Drive-units - Each Speaker:
1" (25mm) metal-dome tweeter
3" (76mm) cone midrange unit
8" (203mm) double-surface, plastic-cone woofer
6" by 9" (155mm by 229mm) elliptical passive bass radiator

Crossover frequencies:
800Hz, 3kHz

Crossover slopes:
First-order, 6dB/octave acoustic

Frequency response:
33Hz–27kHz ±3dB
35Hz–20kHz ±2dB

Phase response:
Minimum ±5°

Time response:
150µs, –20dB

Sensitivity:
86dB/W/m (2.83V)

Nominal impedance:
4 ohms (minimum 3 ohms)

Amplifier requirements:
50 – 250W

Dimensions - Each Speaker:
42" (1067mm) H
12" (305mm) W
13" (330mm) D

Weight - Each Speaker:
70 lbs (32kg)