Rogue Audio Pharaoh Integrated Amplifier with MC/MM Phono, Restored

Free Shipping on *ALL* Electronics (Excluding Speakers, Contiguous 48 US States Only)

We just installed all-new amplifier modules on this great sounding integrated, bringing it to like-new status.

This is the equivalent of putting a brand new engine in a car.

It's now working brilliantly to full factory specs.

$3500 MSRP

General Features:
• Massive high storage linear (!) power supplies
• Mundorf EVO oil coupling caps
• 39 pounds / 45 pounds shipping weight
• 18.25" wide x 18" deep (incl. posts and knobs) 6.5" high
• Fully tested, burned-in, and auditioned
• Detachable IEC power cord
• Entirely designed and hand built in the USA
• 185 WPC/8 ohms 350WPC/4 ohms
• Pure tube mu-follower preamplifier
•  Slow-start automated logical turn-on
•  Green design with extremely low power consumption
•  Standby 6W, 1/2 Power 235W, Full power 435W
•  Damping factor > 1000
•  Three pairs of line level inputs
•  One pair phono inputs, mm/mc with 40/60 dB gain
•  One pair balanced XLR inputs
•  Adjustable phono loading (custom values available)
•  Tube driven 1/4" headphone jack
•  Precision components throughout

Rogue Audio Pharaoh Integrated Amplifier - Manual

More From Rogue Audio:

Pharaoh Integrated Amplifier
When we began development of the Pharaoh amplifier we had one overarching goal: The realization of an integrated amplifier that, without compromise, would offer the performance of the finest separates. To that end, the Pharaoh uniquely combines solid state power amplification with tube preamplification to deliver amazing dynamics as well as the organic midrange and sweet top end that only a tube amp can provide. Along with truly outstanding sonics the Pharaoh boasts numerous features including a tube headphone circuit, mm/mc user adjustable phono, home theater bypass, remote controlled volume with mute, and a processor loop. The Pharaoh is truly a "one box" solution to all of your amplifier needs.

From a technical standpoint, the all important preamplifier section utilizes a pair of long plate 12AU7 tubes configured in a mu-follower topology. Large coupling caps and a host of exotic parts ensure that the audio signal is preserved perfectly during this critical stage of amplification. A huge linear power supply is then used to deliver energy to the solid state power amplifier section. Designed around the highly regarded Hypex OEM modules, the amplifiers provide seemingly unlimited power and dynamics.

It's Good to Be King.....

The SkyFi Testing Process for Solid State Amplifiers:
We start with a visual inspection of all internal components to make sure there are no signs of stress or aging. Capacitors are checked for telltale sings of bulging or leaking, resistors are checked for signs of overheating or cracking, and transistors are checked for signs of stress or damage.

We then power up the unit carefully and run a simple 1k sine wave while monitoring the output on an oscilloscope for signs of distortion or noise. Finally, we run the amplifier to its full rated power into the appropriate resistive load provided by our Sencore amplifier tester. If there is an issue, it will usually be noticeable at this point. If everything reads clean, we will often test for THD (Total Harmonic Distortion) measured by our Keithley distortion meter, and compare it against the original manufacturers specifications. The amplifier then remains powered on to "burn in" on our test bench for a few hours to make sure there are no heat related issues. If there are balanced inputs available they will be also be tested.

Final testing involves pushing actual music thorough the amplifier. We've learned over time that some issues are only noticeable to a trained ear while listening to familiar source material. Our test bench has reference vintage KEF speakers that we're very familiar with which quickly reveal any discrepancies. Some amplifiers will then move into our listening room where they are tested with our in-house reference speakers of choice. 

Please click here for detailed specifics regarding our specialized packing process that separates us from the rest.