Pioneer CLD-3090 LaserDisc and CD Player w/Remote and Manual

Free Shipping on *ALL* Electronics (Excluding Speakers, Contiguous 48 US States Only)

Nice clean and perfectly working LD and CD player from Pioneer.

For some reason LD players sell super quickly in our store. I suspect it because folks trust us to thoroughly check the units to ensure proper operation, as they tend to be a bit fragile over the years.

This one is working brilliantly and is capable of push-button two sided LD playback operation, and Direct CD single CD operation.

The front vacuum fluorescent display is bright and sharp, while the transport and drawer are responsive and solid.

This player shows light signs of use and presents nicely.

lease note the remote missing battery cover and white markings only on the rear of the unit, both shown in our photos.

The last picture shows the transport locking screw which will be installed for shipping.

Recommended Cables:

Kimber Kable - RCA Interconnects - Better

Kimber Kable - RCA Interconnects - Best 

Kimber Kable - Optical Digital Interconnect

More information courtesy of bitcrush.io:

The SkyFi Testing Process for CD and LaserDisc Players:

We start with a visual inspection of all internal components to make sure that there are no signs of heat stress or damage. Capacitors are checked for telltale signs of predictive failure including bulging, shrunken wrappers, or physical leakage. We also inspect resistors and other passive components for signs of overheating. When the unit is first powered on we check the drawer mechanism function.

After the visual inspection we connect the CD Player’s RCA outputs to our Sencore PA81 Power Analyzer which simulates a real world input impedance and allows us to monitor the output on an oscilloscope. We start with a test CD with precision test signals to verify proper output on both channels. If the CD player has balanced outputs these are also tested at this time. If this check passes, we move onto evaluation with actual music CDs. We listen for clicks, skips, and drops during playback. At this time we also check the transport functions including skip, ff, rw, play, pause, repeat, and programming if applicable. If the unit has a remote control, all remote control functions are verified.

If the CD player is capable of SACD playback we test its ability to read SACD layers on multiple discs including standard and hybrid SACDs. At this time we also check the unit’s digital outputs where applicable. If SACD layers are being properly read we should see the digital outputs mute during playback. On redbook CD playback we verify that each digital output maintains proper lock on our bench DAC.

After bench testing is completed, CD players are set up for testing on our long term test rig. During extended testing we make sure that unit can play through several different discs from beginning to end with no skips or lock ups.

For LaserDisc operation we also check video and audio output from different movie discs using specialized video monitors mounted on our tech bench, plus smooth Side A to Side B pushbutton operation (where applicable).