Magnepan MG3.6/R Planar Magnetic Speakers in Wood Finish

Free Shipping on *ALL* Electronics (Excluding Speakers, Contiguous 48 US States Only)

The Magnepan Magneplanar series 3.X Speaker has evolved for decades.

This is the fairly recent 3.6R iteration featuring external crossovers plus bi-wire capabilities.

They're finished in a gorgeous dark wood veneer with black grills.

Tested in our listening room where they performed flawlessly without any rattles or signs of abuse. We were always impressed how much bass can the delivered from this configuration.

These can ship in a single carton anywhere within the Lower 40 US States on a pallet for a flat fee of $600. If you're outside of this area simply contact us for a quote.

MG3.6/R SPECIFICATIONS

SYSTEM DESCRIPTION:
3-Way True Ribbon Tweeter, Planar-Magnetic Midrange and Bass with Bi-Amplification Option

BASS SECTION:
500 Sq. In. Planar-Magnetic

MIDRANGE SECTION:
199 Sq. In. Planar-Magnetic

TWEETER SECTION:
5/32 Inch Width, 55 Inches Long

POLAR RESPONSE - RIBBON DRIVER:
180° Horizontal dispersion both front and back to 20kHz

Midrange/Ribbon Tweeter:
4.2 Ohms Ribbon Tweeter - 3.3 Ohms

CROSSOVER:
Crossover between bass and midrange is 200Hz
Crossover between midrange and tweeter is 1700Hz

RECOMMENDED POWER:
75 to 250 Watts RMS (8 Ohm rated)

SENSITIVITY:
86 dB, 500Hz, 2.83 Volts

FREQUENCY RESPONSE:
** 34 Hz to 40 kHz ±3dB

IMPEDANCE:
Bass - 4.7 Ohms

DIMENSIONS - EACH:
24'W x 71"H x 1-5/8"D

*Because there are no universally accepted methods for loudspeaker measurement, frequency response specifications may be stated by most manufacturers without reference to measurement techniques and/or specific locations in rooms. Magneplanar loudspeaker frequency response curves are minimum average performance levels that may reasonably be expected in normal installations.

**New Magneplanar MG3.6/R speakers will not display their full bass potential. After a month or two of use the bass response will lower 5Hz or more. At this point the response will stabilize and the speakers rated performance (or better) can be realized. While this 5Hz or more of lower bass response is important, the most important factors in obtaining good bass response from the MG3.6/R speakers are room size and geometry, wall material, and speaker placement.

Please click here for detailed specifics regarding our specialized packing process that separates us from the rest.