Diapason Adamantes V Speakers with Stands - Handcrafted in Italy

Free Shipping on *ALL* Electronics (Excluding Speakers, Contiguous 48 US States Only)

Fantastic stand mounted speaker perfect for small scale instrumentals, jazz, or vocals and capable of a very realistic sound stage.

Handcrafted in Italy from solid Canaletto walnut wood which comes through the sound as warm and engaging.

A feast for the ears AND the eyes.

Capable of realistic bass despite their diminutive size, down to 38hz, while remaining efficient at 92db. All you'll need is about 50 to 100 watts to drive these properly and to their full capabilities.

In near mint condition with the tiniest imperfection shown in one of our photos.

While we only have one box in our possession we are in the process of locating the other.

Stands will be packed utilizing our well executed in-house packing process.

MSRP on these is close to $8500.

Specifications:
Frequency response
38/20.000 Hz

Bass Driver Ø
170 mm Direct Drive Polymetylpentene 

Tweeter Ø
19 mm treated silk soft dome

Efficiency
91 dB/W/m

Freq. crossover
4.600 Hz

Nominal impedance
6 Ohm

Min. impedance
3,4 Ohm/200Hz

Type

rear-ported reflex speaker

Finish
Canaletto walnut solid wood

Weight per speaker
9,3 Kg

Weight per stand
12 Kg

Dimensions per speaker
(w x d x h) 246 x 398 x 380 mm

Dimensions per speaker with stand
(w x d x h) 260 x 398 x 1148 mm

Optional
cloth cover grille

Links for more info:

https://www.diapason-italia.com/en/adamantesV.html

https://www.diapason-italia.com/en/media/prodotti/en/adamantesV/brochure/reference.pdf

Excellent review:

https://the-ear.net/review-hardware/diapason-adamantes-v-standmount-loudspeaker/

Recommended Cables:

Kimber Kable - Speaker Cables - Good

Kimber Kable - Speaker Cables - Better

Kimber Kable - Bi-Wire Speaker Cables - Best

The SkyFi Testing Process for Speakers:
Our speaker evaluation process starts with a visual inspection of all drivers. We are looking for damaged or deteriorating woofer surrounds, dented tweeter domes, and cone damage. We also inspect the speaker connection points for loose or broken connectors.

After the initial visual inspection we connect the speakers to a reference amplifier with our preferred test tracks. With the speakers placed with proper distance we listen to each driver to make sure that they are producing the intended frequencies with no signs of distortion or rattle. During listening tests with test tracks we check for proper stereo imaging and bass response at various listening levels. If there are any audible signs of issues, the speakers are taken to the bench where we perform a frequency sweep to isolate the issue so that it can be resolved by component repair or replacement.