Bowers & Wilkins DB2D Subwoofer In Rosenut Finish

Free Shipping on *ALL* Electronics (Excluding Speakers, Contiguous 48 US States Only)

Like new with manual, tested and working perfectly.

$4499 current MSRP

More from B&W:

The parallels between Bowers & Wilkins' flagship 800 Series Diamond loudspeakers and its DB2D subwoofer are more than skin deep. The 16.9 x 14.8 x 14.2-inch (HWD) sub uses the same 10-inch Aerofoil cone drivers found in the acclaimed Diamond range and touts some of the same leading-edge architecture and materials. The result: Uncompromising performance marked by quickness, depth, efficiency, punch, focus, and solidity. In both music-based and home-theater systems, DB2D functions as a key cog in a chain focused on reproducing sound and effects with thrilling realism and truthful accuracy.

Bowers & Wilkins' light, ultra-stiff Aerofoil cone drivers, which resist bending and flexing while playing with stellar control and outstanding precision, reside at the heart of DB2D. In addition to those 10-inch drive units and a 1000-watt Class D Hypex amplifier, DB2D leverages opposed, balanced configuration of the bass cones, an approach that lessens cabinet vibration, reduces coloration, and increases clarity. Preamplification comes courtesy of Dynamic EQ plus automatic calibration and equalization, ensuring consistency and clean delivery.

Setting up the cool-running DB2D couldn't be easier. Bowers & Wilkins' app-based setup is not only simple to use, it's great fun. The app includes positioning guides, troubleshooting, settings, presets, and more — such as the ability to optimize subwoofer performance by using the microphone on your phone. With such tools at your disposal, and DB2D in your corner, you cannot go wrong.

Bowers & Wilkins DB2D Subwoofer Has the Same 10-Inch Aerofoil Cone Drivers Found in the Acclaimed 800 Series Diamond Range: Features App-Based Setup and 1000-Watt Amplifier

Specifications
Drive units:
2 x 250mm (10 in) Aerofoil-cone drive units in a balanced configuration

Frequency range:
-6dB at 8.5Hz - 500Hz

Frequency response:
10Hz - 350 Hz -3dB (centered on level at 100Hz)

Max power output:
1000W

Inputs:
• 2 x XLR
• 2 x RCA
• 2 x 3.5mm 12V trigger
• RS-232 - 9-pin D connector

Dimensions (H x W x D):
16.9" x 14.8" x 14.2"

Weight:
79.4 lbs.

Link to Info Sheet:

https://www.bowerswilkins.com/-/media/files/documentmaster/bowerswilkins/pdp-documentation/db-series/db2d-information-sheet.pdf

Link to Manual:

https://www.bowerswilkins.com/-/media/files/documentmaster/bowerswilkins/pdp-documentation/db-series/db-series-manual-all_0.pdf

Recommended Cables:

Kimber Kable - Subwoofer Single Cable Interconnect - Better

Kimber Kable - RCA Interconnects - Better

Kimber Kable - RCA Interconnects - Best

Kimber Kable - BALANCED XLR Connectors - Better

Kimber Kable - BALANCED XLR Connectors - Best

Kimber Kable - Power Cords - Better

Kimber Kable - Power Cords - Best

The SkyFi Testing Process for Subwoofers:

Our subwoofer evaluation process starts with a visual inspection of all drivers. We are looking for damaged or deteriorating woofer surrounds, cone damage, or rubbing voice coils. We also inspect the input connections for damage.

After the initial visual inspection, we connect the sub at our bench and perform a sine wave sweep from about 200Hz down to around 10Hz. During this sweep we are listening for excessive rattle or other signs of improper function. If the sweep passes, we then increase the input level to evaluate how the woofer performs at high output levels. If the woofer has built in crossover features or multiple connection options these features are tested at this time.

We complete the subwoofer evaluation by feeding the unit with an audio signal in conjunction with our house music system to see how it responds to low frequency content in real world conditions while paired with a full range system.