Shure V15 IV-G MM Phono Cartridge - Rare Complete Kit

Free Shipping on *ALL* Electronics (Excluding Speakers, Contiguous 48 US States Only)

General:
Shure phono cartridges are highly respected by audiophiles and professionals for their sound quality and dependability. This Shure V15 IV-G MM (Moving-Magnet) phono cartridge is no exception. 

The stylus was examined under our dedicated shop microscope and it looks to have been very gently used.

This particular cartridge will come complete with its original box and paperwork.

SkyFi Cosmetic Notes:
Some signs of wear on the box mostly age related. Overall good condition.

Ownership:
Single Owner

General Sound:
Smooth, uncolored, undistorted natural and clean

Cosmetic Condition:
8/10 = Very Good. Excellent front faceplate, one minor flaw on chassis side or top. See our detailed rating description here.

Working Condition:
Working perfectly and tested in our lab.

Included:
Complete Kit as it Left the Factory

Packing:
Original Manufacturers Packing

Specs:
- Output level: 5 mV at 1 kHz and 5 cm/s peak recorded velocity 
- Frequency range: 10 Hz–25 kHz 
- Channel separation: 25 dB at 1 kHz 
- Optimal capacitance load: 200–300 picofarads in parallel with 47,000 ohms 
- Stylus: Spherical or 0.2 by 0.7 hyperelliptical

Link to Manual:
Click Here

Testing Process:
We start by doing a detailed physical inspection under light magnification to asses the cantilever condition, its position in the cartridge body, and the condition of the suspension.

We also inspect any coil wires and the output connections to make sure it hasn't been strained. We then perform a light cleaning with specialized agents and very carefully blow dry with compressed air.

Following that, we conduct a thorough examination using our Wild Heerbrugg professional microscope. From there we can asses the wear and quality of the stylus and determine how much use it has seen, and if there are any mechanical issues. We can also identify if it needs further cleaning or care.

We then move the cartridge to a digital microscope where we take photos of the cantilever and stylus for future reference.

Next we move to the test bench where we can check for continuity of each channel and resistance.

On certain cartridges (or if the technician feels necessary) we install the cartridge on a turntable and run several test records to ascertain tacking ability, distortion, and compliance.