Pioneer Elite CLD-91 LaserDisc and CD Player - Super Clean

Free Shipping on *ALL* Electronics (Excluding Speakers, Contiguous 48 US States Only)

Super clean CLD-91 that plays both LD and CD's well with no issues.

Drawer requires a light nudge to close all the way to load discs.

Light blemishes on the top cover and rear side panel, but super clean from the front.

Comes to you in its original box with the original remote!

Please see our last photos for full specs from the original owner's manual located online.

Standout Features Include:
• (ALPHA) Turn Dual Side Play Function
• Dual Centering
• Digital TBC (Time Base Collector)
• 4-fsc, 8-bit Digital Memory
• S-Video Output
• 8-fs Digital Filter and 18-bit Twin D/A Converter (DACs)
• Optical Digital Output
• Thin Type 20-cm LD Single Disc Playback
• 3-inch CD Disc

Click below to add our recommended matching cables from Kimber Kable, all brand new as SkyFi is an official Kimber dealer.

Kimber Kable - RCA Interconnects

Kimber Kable - Optical Digital Interconnect

The SkyFi Testing Process for CD Players:

We start with a visual inspection of all internal components to make sure that there are no signs of heat stress or damage. Capacitors are checked for telltale signs of predictive failure including bulging, shrunken wrappers, or physical leakage. We also inspect resistors and other passive components for signs of overheating. When the unit is first powered on we check the drawer mechanism function.

After the visual inspection we connect the CD Player’s RCA outputs to our Sencore PA81 Power Analyzer which simulates a real world input impedance and allows us to monitor the output on an oscilloscope. We start with a test CD with precision test signals to verify proper output on both channels. If the CD player has balanced outputs these are also tested at this time. If this check passes, we move onto evaluation with actual music CDs. We listen for clicks, skips, and drops during playback. At this time we also check the transport functions including skip, ff, rw, play, pause, repeat, and programming if applicable. If the unit has a remote control, all remote control functions are verified.

If the CD player is capable of SACD playback we test its ability to read SACD layers on multiple discs including standard and hybrid SACDs. At this time we also check the unit’s digital outputs where applicable. If SACD layers are being properly read we should see the digital outputs mute during playback. On redbook CD playback we verify that each digital output maintains proper lock on our bench DAC.

After bench testing is completed, CD players are set up for testing on our long term test rig. During extended testing we make sure that unit can play through several different discs from beginning to end with no skips or lock ups.