NSMT Model 100 Speakers - Highly Reviewed

Free Shipping on *ALL* Electronics (Excluding Speakers, Contiguous 48 US States Only)

Very rare and capable speaker from NSMT featuring an extremely simple crossover network and super capable built-in powered subwoofers.

Sensitivity is 93db allowing the use of a very low-powered amplifier to maximize detail. You can use as little a 5W!

Heavily upgraded to squeeze every bit of performance from these beauties.

Upgrades include:
1) The base of the speaker was additionally fortified and the base and port were closely custom matched to the Sapele finish of the speaker 
2) Eight (8) of these WBT speaker binding terminals ~ $1,001.95 
3) Two (2) Jupiter capacitors for the crossover ~ $233.95 apiece
4) Two (2) Dueland resistors for the crossover ~ $122.75 apiece
These utilize a MINIMALIST crossover - a First Order Phase Coherent crossover - consisting ONLY of one capacitor and one resistor. True simplicity!
5) Eight (8) IsoAcoustics footers (Gaia II) ~ $618.00

The total cost of the speaker was $17,106.27

From many glowing reviews:
• "... the deepest most powerful ... drum whacks that I have ever heard." (Francisco Duran/Positive Feedback)
• "These unassuming speakers may be the best on the market today." (barany/Audiogon)
• "... these are the best speakers I have ever heard hands down." (sslide/Audiogon)
• "The bass was great on the Tektons (Ulfberht) but the bass on these is otherworldly, It's the best I've heard." (barany/Audiogon)
• "The Model 100 demonstrated ... how it could replicate the original time/space with wrap-around holographic immersion for a you-are-there sense that was greater than I ever experienced from a box speaker. The only times previouis I heard this was from a pair of omnidirectional MBL Radialstrahler E101 MkII." (Terry London/6moons)
• Component of the decade: Most wanted components 2010-2020 (stereo times) 

Special Features
Design: Acoustic suspension, time coherent, crossover-less woofer, first order crossover to tweeter, two-way with built in bandpass subwoofer
Drivers: 1-1/8 inch textile dome tweeter, 8 inch woven carbon fiber woofer, 10 inch paper cone subwoofer
Crossovers: single capacitor and resistor to the tweeter, single air core copper inductor and capacitor to the subwoofer (passive version),
Wiring: Multi-strand copper to tweeter, woofer, and subwoofer.
Connectors: Fully insulated, gold plated five-way bi-wire/bi-amp binding posts

Connections to amplifier via speaker level inputs.

Click below to add our recommended matching cables from Kimber Kable, all brand new as SkyFi is an official Kimber dealer. 

Kimber Kable - Speaker Cables

Kimber Kable - Bi-Wire Speaker Cables

Technical Data:

Dimensions: height 44 inches; Base -14 inches wide by 14.5 inches deep; Top Panel -12 inches wide by 11 inches deep

Frequency Response: 20 Hz - 20 kHz
Sensitivity: 93 dB 1 watt/m
Rated Impedance: 8 ohms
Minimum Impedance: 4 Ohms
Recommended Power: 5 - 200 watts
Shipping Weight: 80 pounds each speaker

Cabinet construction: sealed anti-resonant medium density CARB 2 fiber board and/or natural plywoods. The front of the cabinet is slanted 2 degrees, from the bottom to top to help align the acoustic centers of the drivers and the subwoofer output and to eliminate standing waves in the cabinet.

Standard Finishes: natural birch plywood, red birch plywood, sapele plywood, walnut plywood. Other finishes available at additional cost.

Active Bandpass Subwoofer Section
• 250 Watt amplifier
• 10 inch long-throw treated paper cone woofer
• Auto-on power switch controlled by input signal
• Continuously variable crossover from 40 Hz to 180 Hz at 24 dB/octave
• Volume control to adjust output
• Overload and thermal and fuse protection with output relay
• Gold plated RCA line level input and output connectors
• Removable IEC type power cord
• Discrete TO-3P output devices
• THD: Less than 0.05%
• Power requirements: Switchable, 120/240 VAC, 50/60 Hz