McIntosh XRT1K Line Array Speakers 1200W! Pre Owned - In Store Only

The loudspeaker engineers at McIntosh are pleased to introduce the XRT1K, the first member of a new family of speakers that benefit from the knowledge garnered in the development of the rave-reviewed XRT2K speaker system.

Newly designed dual 10-inch woofers deliver a more powerful and dynamic bass response than was achievable in prior models. The high-gloss, piano black extruded aluminum enclosure is extra deep to allow top-porting. A new woofer casting permits the XRT1K to have an unusually narrow profile for a loudspeaker with 1,200 watts of power handling and its 8-Ohm impedance is easy on amplifiers.

Two columns of twenty-two 2” black titanium midranges flank a column of twenty-eight 3/4” black titanium tweeters forming a tri-column line design. The new 2” inverted-dome midranges ensure wide dispersion throughout the entire listening area for significant imaging improvement. The new 3/4” tweeter domes are small enough in diameter to maintain wide dispersion extending out to the limits of human hearing, and their incredibly low moving-mass extends response out to 45kHz. Such wide bandwidth portends smoother frequency and phase response within the audio band for non-fatiguing sound... a McIntosh Hallmark.

McIntosh XRT1K Line Array Loudspeaker System - Sales Brochure

McIntosh XRT1K Line Array Loudspeaker System - Owner's Manual

McIntosh Performance Features Include:
• Patented LD/HP Technology
The McIntosh Low Frequency Loudspeaker Elements feature the patented LD/HP Magnetic Circuit Design. This design, when compared to conventional Loudspeaker Elements, reduces distortion significantly. It also increases power handling and efficiency.

• Neodymium-Iron-Boron Alloy Magnets
The 44 two inch Midranges and 28 three-quarter inch Dome Tweeters all use this Alloy. The Neodymium-Iron- Boron Alloy has the highest flux density per unit of volume and helps to keep the Column weight to a minimum.

• Low Harmonic and Intermodulation Distortion
The XRT1K Loudspeaker System is capable of reproducing the full dynamic range of a symphony orchestra with very low audible distortion of any kind.

• Large Long Low Frequency Port
The XRT1K Loudspeaker System utilizes a very large 6 inch diameter port to increase bass output, reduce distortion and improve the overall efficiency of the Loudspeaker.

• High Power Handling
The Loudspeaker Elements and Crossover Components of the XRT1K are all chosen for use with powerful amplifiers up to 1,200 watts.

• Superior Imaging
Locating the Tweeters between the two rows of Midranges generates a symmetrical horizontal polar response for superior imaging.

• Versatile Operation and Placement
In addition to the regular connections, the XRT1K Loud- speaker System provides separate connections for Bi- Amplification and Tri-Amplification hookups, as well as Bi-Wiring and Tri-Wiring.

• Extruded Column
The Column enclosure is extruded thick aluminum construction with non-parallel internal sides and is given a High Gloss Black Piano Type Finish.

• Gold Plated Input Connectors
The XRT1K input connectors are gold plated for superior corrosion resistance and high electrical conductivity.

Techical Specifications
System Driver Complement
• Two 10 inch LD/HP Woofers
• Forty-four 2 inch Titanium Inverted Dome Midranges
• Twenty-eight 3/4 inch Titanium Dome Tweeters

Impedance
8 ohms Nominal

Frequency Response
16Hz - 45kHz

Sensitivity
88dB (2.8V/1m equivalent)

Crossover Frequencies
250Hz
2,000Hz

Power Handling
1,200 Watts Maximum

General Specifications
Finish Enclosures
High Gloss Black

Finish Grille
Black Knit Cloth with High Gloss Black Trim

Overall Dimensions - Each
Height is 79-1/2 inches (201.9cm) including feet
Width is 14-1/2 inches (36.8cm)
Depth is 15-7/8 inches (40.3cm)

Weight - Each
168 pounds (76.2 kg) net
241 pounds (109.3kg) in shipping carton