McIntosh XR100 Floorstanding Loudspeaker (Pair) - NEW
Click here to schedule an appointment to visit our store.
Please note this item must be purchased in store and we will not ship under any circumstances. Click here for more information about this policy.
Please support your local McIntosh Dealer.
McIntosh Performance Features Include:
• Woofers with Patented LD/HP® Technology
The McIntosh Low Frequency Loudspeaker Elements feature the patented LD/HP Magnetic Circuit Design. This design, when compared to conventional Loud- speaker Drivers, reduces distortion significantly. It also increases power handling and efficiency.
The rear vent through the magnetic assembly offers improved heat dissipation. The die cast basket has an open air area under the voice coil/spider assembly to prevent displacement noise. The polypropylene cone with a rubber surround has a four layer copper voice coil and is rigid to perform as a near perfect air piston.
All together these advances in woofer design construction and materials produce the very important first several octaves of music, with a high degree of accuracy and superb transient response. This performance level rivals woofers twice the size of the XR100 woofer.
• Neodymium-Iron-Boron Alloy Magnets
The 10 two inch Midrange Drivers and the three-quarter inch Dome Super Tweeter all use this Alloy. The Neodymium-Iron-Boron Alloy has the highest flux density per unit of volume. This allows for a smaller physical size driver and thus closer driver to driver placement for improved dispersion.
• Dual Midrange Crossover Points
There are several benefits when using multiple Mid- range drivers. First, there is a substantial increase in power handling capacity far greater than a single larger diameter midrange driver.
Second, due to mutual acoustic coupling there is an increase in output volume while at the same time a reduction in audible distortion. Eight of the 10 Midrange Drivers reproduce the lower two octaves of midrange frequencies. The remaining two Midrange Drivers reproduce the upper two octaves of midrange frequencies and are located directly adjacent to the tweeter. This maintains wide dispersion with a stable sound image throughout the upper midrange frequencies.
• Loudspeaker Protection
The XR100’s built-in speaker protection incorporates four automatic resetting solid-state devices in the crossover network. One protects the tweeters, one each for the low and upper midrange drivers and one for the woofers.
General:
Very capable full range (and I mean FULL RANGE) speakers from McIntosh made right here in the good old USA. Capable of blowing out the windows AND providing a detailed nuanced sound.
More from McIntosh:
The XR100 Floor Standing Loudspeaker is sleek and contemporary in appearance while producing full range audio reproduction typical of much larger cabinet designs.
Fine gloss wood finishes are offered in Black and Red Walnut.
The magnetically attached grille is acoustically transparent and covered with neutral black cloth.
Our patented Solid Cinch™ speaker binding posts easily but securely attach the speaker cables to prevent them from coming loose and possibly causing a short; the binding posts are gold-plated to prevent corrosion and ensure a quality signal is delivered to your speakers.
Unique front panel McIntosh logo may be illuminated when configured with a McIntosh system.
Amplifiers from 75 to 600 Watts are appropriate power for XR100 speakers.
Electronic Specifications:
Impedance Nominal
8 Ohms
Power Rating
75 to 600 Watts
Frequency Response
30 Hz to 45 kHz
Sound Pressure Level, 2.8V/1m
87 dB
Crossover
300 Hz, 2 kHz, 8 kHz
DRIVER SPECIFICATIONS
Number of Woofers
4
Woofer Size
6"
Woofer Type
Cast Frame, LD/HP®, Poly Cone
Number of Midranges
10
Midrange Size
2"
Midrange Type
8 x Inverted Titanium Dome Midranges covering 300 Hz to 2 kHz, and 2 Inverted Titanium Dome Midrange-Tweeters covering 2 kHz to 8 kHz
Number of Tweeters
1
Tweeter Size
3/4"
Tweeter Type
Titanium Dome
General Specifications:
System Type
Ported 4-Way Floor Standing
Grille
Black knit cloth, magnetically attached
Available Finishes
Red Walnut, Black
Weights and Dimensions:
Unit Dimensions (W x H x D) - EACH
8" (20.3cm) x 51" (129.5cm) x 18-1/2" (46.9cm)
(including cables and connectors)
Unit Weight - EACH
68.5 lbs (31.1 kg)
Shipping Weight - EACH
83 lbs (37.6 kg)
Recommended Cables:
Click here to schedule an appointment to visit our store.
Please note this item must be purchased in store and we will not ship under any circumstances. Click here for more information about this policy.
Please support your local McIntosh Dealer.
Choose options