Skip to content

Cart

Your cart is empty

NEW ARRIVALS + SYSTEM OF THE WEEK NEWSLETTER

Subscribe to receive updates, access to exclusive deals, and more... We promise not to give your info away.

Epos ES14 Speakers With Matching Stands, Cult Classic

Sale price$0.00
Free Shipping on *ALL* Electronics (Excluding Speakers, Contiguous 48 US States Only)

Pickup currently unavailable at SkyFi 479

Epos Es14 Speakers With Matching Stands Cult Classic

Epos ES14 Speakers With Matching Stands, Cult Classic

SkyFi 479

Pickup currently unavailable

479 South Broad Street
Glen Rock NJ 07452
United States

+12018790000

The ES14 are considered a cult classic among audiophiles.

Proac Killers. Rare and highly reviewed.

Perhaps this is because they basically do not have a crossover. Yes you read that right, meaning that the signal goes straight from your amplifier to the drivers. Ok, the tweeter has a small capacitor for self-protection, but that’s it.

This all results in one of the cleanest speakers I’ve ever heard.

Open up one of your speakers and take a look at the multitude of components that impede the signal. You'll find coils, capacitors, resistors etc. which all affect how your drivers work and sound.

They are no slouch either as a significant amount of bass can come from these boxes. There is so much, some may chose to use the included foam port damper that comes with them. If you’re going to place them in the corners of your room where the bass is acoustically amplified by the wall, you'll probably want to use the dampers.

Included with your purchase is a set of matching original stands that fit the speakers absolutely perfectly. They have spikes on each corner to couple the speaker tightly to the stand. They also have spikes to couple the stands to the floor, plus they're adjustable for perfect leveling.

Acoustically the speakers are 100%. They sound amazing and all drivers work as they should. I just ran a frequency generator through them along the entire spectrum and they don’t exhibit any distortion, coloration, or problems.

Cosmetically they are in amazing condition, especially considering their age. There are no significant scratches or dings to speak of. Yes if you use a magnifying glass you're likely to find something, but you’d have to really look.

On the back you'll find the bass port and double set of banana posts indicating this is the later version with bi-wire capabilities.

These were designed and sold without grills so please don’t ask if they're included.

Here is an excerpt from a Stereophile review:
Through the vital midrange, the Epos 14 is superb. It is, in my opinion, neutral in perspective, and very low in coloration. I occasionally was aware of just a trace of boxiness or nasality, but it was elusive.

What set it apart from the other loudspeakers in this survey was a sense of inner detailing, "life," and dynamic transparency which were unique, in my experience, in a two-way design at this price.

There was a striking reproduction of overall depth which equalled, or even exceeded, that of the Snell Qs. In the latters' case, the depth appeared to arise out of its extended, airy top end.

The Epos struck me as being a result of superior midrange transparency (as its top-end extension is, subjectively, above average but not exceptional).

This contributed considerably to a sense of three-dimensional layering which, while less than that in the better (and largely far more expensive) high-end loudspeakers, was nonetheless very impressive.

That, combined with realistic yet natural dynamics, a precise image which filled the space between the loudspeakers (though only rarely beyond), and a noteworthy rendering of vertical height, made for an overall presentation through the vital midrange which was convincing and, most importantly, musically valid and involving.

Speaker Specifications:
Two-way, stand-mounted, reflex-loaded box loudspeaker

Drivers:
6.5" thermoplastic-cone bass/midrange
1" aluminum-dome tweeter

Measured crossover frequency:
3.3kHz

Frequency response:
36Hz - 20kHz ±3dB

Sensitivity:
86 dB/W/m

Nominal impedance:
8 ohms (7 ohms minimum)

Amplifier requirements:
35W recommended minimum

Dimensions:
20" (508mm) H by 9" (229mm) W by 12" (305mm) D

Weight:
24 lbs (10.9kg) each (stands add additional weight)

Please click here for detailed specifics regarding our specialized packing process that separates us from the rest.

Item

Included

Original Box

No

Manual

Yes

Remote

Not Applicable

Cables

No

Physical Condition

9

Working Condition

10

SKU: 103255