Bowers & Wilkins HTM4 D2 Diamond Center Channel In Gloss Black

Free Shipping on *ALL* Electronics (Excluding Speakers, Contiguous 48 US States Only)

HTM4 D2 Diamond series center speaker from Bowers and a perfect match to your 800 series speaker regardless of the series.

Finished in gloss black which was the most common color for much of the 800 series.

In very clean condition with no signs of wear or abuse. Tested and working brilliantly.

Includes jumpers in case you don't want to bi-wire, plus the original box to ensure safe transport.

Recommended Cables:

Kimber Kable - Speaker Cables - Good

Kimber Kable - Speaker Cables - Better

Kimber Kable - Bi-Wire Speaker Cables - Best 

Specs:
Enclosure type:
Front

Port (bass reflex) location:
42Hz (measured at -6dB) - 33kHz

Frequency range:
50 W - 120 W

Recommended power:
88 dB at 2.83V/1m

Sensitivity:
8 ohms

Nominal impedance:
4.7 ohms

Minimal impedance:
2

Number of drivers:
2-way

Drivers:
Woofer / Midbass, Tweeter

Woofer/Midbass Size:
1 x 6.5 in

Woofer/Midbass cone material:
Kevlar / Glass Fiber / Carbon Fiber

Tweeter Size:
1 x 25.4 mm

Tweeter type:
(Soft) dome

Dimensions:
19.1" x 11" x 11.3"

Weight:
27 lbs

The SkyFi Testing Process for Speakers:

Our speaker evaluation process starts with a visual inspection of all drivers. We are looking for damaged or deteriorating woofer surrounds, dented tweeter domes, and cone damage. We also inspect the speaker connection points for loose or broken connectors.

After the initial visual inspection we connect the speakers to a reference amplifier with our preferred test tracks. With the speakers placed with proper distance we listen to each driver to make sure that they are producing the intended frequencies with no signs of distortion or rattle. During listening tests with test tracks we check for proper stereo imaging and bass response at various listening levels. If there are any audible signs of issues, the speakers are taken to the bench where we perform a frequency sweep to isolate the issue so that it can be resolved by component repair or replacement.