Bowers & Wilkins HTM1D Amazing and Massive Center Channel Speaker! 500W

Free Shipping on *ALL* Electronics (Excluding Speakers, Contiguous 48 US States Only)

These bad boys don't come up very often.

As a matter of fact this is the first one I've ever seen in person.

I was taken back by the sheer size of it, its absolutely huge and capable of 500W. 

Utilizes the famed diamond tweeter which makes this a match for most modern 800 series speakers.

We also have the original and official B&W shipping carton for this center speaker so we are are able to ship on a pallet anywhere in the lower 48 US States for $625 including insurance. Local pickup also welcome.

Included with your purchase is the speaker, original speaker grilles (two total one small round and one large rectangular), original dual-purpose feet x4 (see below from B&W and note stock image in our photos), plus the original shipping carton which is not shown in our photos. 

Click below to add our recommended matching cables from Kimber Kable, all brand new as SkyFi is an official Kimber dealer. 

Kimber Kable - Speaker Cables - Better

Kimber Kable - Bi-Wire Speaker Cables - Best

More from B&W:
The HTM1D is the largest of four centre speakers in the 800 Series. The full configuration of FSTTM midrange in a Marlan® sphere / tube ‘head’ with diamond dome tweeter on top is used, so that the system perfectly voice matches either the 800D, 801D or 802D in a substantial and powerful multi-channel installation.

The HTM1D uses three 8” diameter Rohacell® cone drivers with twin rear-firing FlowportsTM. All drivers are, of course, magnetically shielded to avoid picture distortion with CRT-based screens.

The HTM1D is specifically intended to be mounted on the floor, its low profile allowing a large projection screen to come within 2 ft. of the floor. Supplied with the system are four heavy-duty height-adjustable feet. This design allows up to 1.6” of vertical adjustment so that the speaker may be tilted back to face more towards the listeners. They have a case hardened spike at one end for carpeted floors, and a non-marking rubber pad on the other for more vulnerable surfaces.

Description:
3-way vented-box system

Frequency Range:
-6 dB at 32 Hz and 33 kHz

Frequency Response:
38 Hz – 28 kHz ±3 dB on reference axis

Sensitivity:
90 dB spl (2.83V, 1M)

Nominal Impedance:
8Ω (minimum 3.7Ω)

Dimensions:
H 23.0” W 38.3” D 22.8”
(H 585mm, W 974mm, D 580mm)
(not including feet)

Weight (unboxed):
93 kg / 205 lbs.

Finishes:
Cherrywood, Rosenut, Black Ash

Bowers & Wilkins HTM1D - Owner's Manual