Museatex Meitner PA6i Preamp + STR-50 Amplifier System with Wired Remote

Free Shipping on *ALL* Electronics (Excluding Speakers, Contiguous 48 US States Only)

Besides their diminutive size and great build quality, the first thing that stands out is the uniqueness in design.

The wired remote control is super cool and it even has rotary volume controls!

The cabinets are finished in gloss wood and have faceplates with no buttons on them. Back in the 1980's and 90's that was super unusual.

The preamp features very high quality RCA jacks and and an outboard power supply. 

The amp can provide up to 50W of power per side and uses conventional banana jacks for outputs.

Both units go super well together so we've decided to keep them paired up.

They were been tested in our lab and are performing properly and reliably.

*Please note the Meitner/Museatex PA-6 was modified turning the phono stage input into another standard line level input. There is no installed phono stage.

Click below to add our recommended matching cables from Kimber Kable, all brand new as SkyFi is an official Kimber dealer.

Kimber Kable - RCA Interconnects

Kimber Kable - Phono Interconnects

Kimber Kable - Speaker Cables

MEITNER PA6i
PREAMPLIFIER WITH REMOTE CONTROL
The PA6i may seem to be simply a preamplifier. It is not. It is the descendant of generations of PA6 preamplifiers. Each one a definitive step forward in the quest for excellence in musical reproduction.The original PA6 pioneered state-of-the-art solid state control for volume, balance and switching of input sources while most designers were still learning mechanical controls. User changeable phono modules. Full remote control. Absolute phase inversion on the remote. Floating Charge Power Supply. Elegance of appearance.

These are hallmarks of the PA6 lineage. The PA6i of today achieves a level of listening experience that we would not have thought possible back then.
The PA6i is more than a preamplifier. It is the cornerstone of a comprehensive Meitner system. Individual components that may be matched with those of other manufacturers for superb results, but which together comprise a perfectionist system of unsurpassed sonic merit.

Design Features:
- Remote control (Wired or Infrared)
- No mechanical switches or pots
- Adjustable source levels
- Interchangeable phono modules (not included)
- Meitner Floating Charge Power Supply.
- "Ramp" Mute for greater listener comfort.
- Low output Impedance.
- Extensive fault protection.
- High parts quality.

Specifications:
- Tuner/Aux-CD Input: 500 mV Nominal. 33 K Ohms Input Impedance.
- Tape Input: 100 K Ohms Input Impedance.
- Frequency Bandwidth: 1 Hz to 100 KHz(+0, -3 dB).
- Harmonic distortion: less than 0.01% (-80 dB) 20 Hz to 20 KHz at +10 dB output.
- IM Distortion: less than 0.01%.
- Line Input Overload: 26 dB REF to 500 mV input.
- Line Input Signal/Noise Ratio: 96 dB (A WTD).
- Output D.C. Offset: +/- 2 mV maximum.
- Maximum Output Level: 8V Max. at rated THD into 600 Ohms.
- Output Impedance: 47 Ohms.
- Construction: Pure copper printed circuit board; No tin plating; class A design; gold plated connectors.
- Power Supply: External, Regulated +/- 15v/300mA.
- Power Consumption: 20 Watts.
- Power Requirements:117V or 220V - 50 or 60 Hz.

Click below to add our recommended matching cables from Kimber Kable, all brand new as SkyFi is an official Kimber dealer.

Kimber Kable - RCA Interconnects

Kimber Kable - Phono Interconnects

Kimber Kable - Speaker Cables