JL Audio E-Sub E110 - CNET's "Best Small Powered Subwoofer" 1200W - Active Warranty (2023) (10% Off)

$1,619 $1,799

Hailed as one of the best small subwoofers available, this small 10-inch "powerhouse" is capable of moving the furniture in your room if you're not careful!

Out technical staff was quite impressed by the cleanliness of the bass it produced on the test bench when pushed hard.

If you've been shopping for a JL sub you're likely aware of the production shortages coupled with the high demand.

This is available today AND carries a full JL Audio manufacturer warranty through June 24, 2023. 

In overall very good condition but there are a few light blemishes on the top worth noting (very typical of this type of speaker finish).

Click below to add our recommended matching cables from Kimber Kable, all brand new as SkyFi is an official Kimber dealer.

Kimber Kable - Subwoofer Interconnect

Item

Included

Original Box

Not Included

Manual

Yes - Online Only

Remote

Not Applicable

Cables

Yes - Power Only

Physical Condition

7 / 10

Working Condition

10 / 10

JL Audio E-Sub e110-ASH Product Manual

More from JL Audio:
Powered Subwoofer with 10-inch Subwoofer, 1200 watts

Applying a series of our key technologies, E-Sub powered subwoofers deliver exceptional sound quality, power and value in a wide range of demanding applications

E-Sub drivers employ our exclusive DMA technology to optimize the drivers' motor strength, ensuring linear behavior over a very long excursion range. Unlike typical steady-state modeling systems, DMA takes into account the dynamic shifts created by current flow and back EMF under real power conditions, with real program material. The payoff offered by DMA optimization is a driver that faithfully tracks its input signal, at all listening levels, leading to superior bass definition and dynamics.

The extreme mounting depth of the E-Sub driver is very deliberate. It permits wide gaps to exist between the three suspension elements (the rubber surround and the dual spiders), imparting exceptional mechanical stability over the driver's full excursion range. This further improves linearity, reduces distortion and enhances long-term reliability. In a stroke of engineering elegance, the E-Sub’s steel front mounting flange forms the entire front baffle of the finished product, while the driver’s back-plate is threaded and bolted to the rear wall of its enclosure for support.

To power these innovative drivers, we engineered a completely new switching amplifier with a regulated, switching power supply, making its chassis more compact, lightweight and efficient, while still delivering ample, clean power to fully exercise the E-Sub driver's performance envelope.

Conveniently controlled from the E-Sub cabinet’s top panel, the amplifier incorporates studio-grade signal processing to make adjustments a much more enjoyable experience than rear–mounted controls found on most powered subwoofers. An attractive cover hides and protects the controls during normal use.

The feature set has been designed to allow the use of E-Subs in a wide range of applications, from full home theater systems to dedicated two-channel music systems, to desktop audio workstations. Analog inputs are provided for unbalanced line-level signals or speaker level signals. Dedicated line outputs are included to make a bi-amped system arrangement with no additional hardware required. Useful in combating ground-related noise problems, a rear panel switch configures the line level inputs as grounded or isolated.

The E-Sub’s active crossover is a true two-way, 4th order Linkwitz-Riley design, with a low-pass filter feeding the subwoofer's amplifier and a high-pass filtered signal exiting its line outputs. When the on-board crossover is defeated, as is typical in a home theater installation, the line outputs deliver a pass-through, buffered signal identical to its line inputs, easily permitting multiple E-Subs to be interconnected in a ‘daisy-chain' arrangement. Switchable polarity and a fully variable phase control round out the signal processing section. All signal processing is performed in the analog domain, ensuring very low latency in critical applications.

Precision-built in JL Audio's U.S. factory, all E-Sub are individually performance-verified and tested to deliver years of listening enjoyment in your home audio or home theater system.

General Specifications:
Enclosure Type
Sealed

Frequency Response (Anechoic)
25 - 116 Hz (±1.5dB)
-3 dB at 23 Hz / 120 Hz
-10 dB at 18 Hz / 165 Hz

Effective Piston Area (Sd)
58.78 sq in / 0.0379 sq m

Effective Displacement
131 cu in / 2.1 L

Amplifier Power
1200 W RMS short-term

Power Mode(s)
Off, On or Automatic (Signal-Sensing)

Light Modes
N/A

Signal Processing:
Unbalanced Inputs
Stereo or Mono (two RCA jacks)

Balanced Inputs
N/A

Speaker/High-Level Inputs
Stereo or Mono (removeable plug)

Input Grounding
Isolated or Grounded

Input Modes
N/A

Level Control
Variable, from full mute to +15dB over reference gain

Filter Mode(s)
Low-Pass

Filter Slope(s)
24 dB/octave

Filter Frequency Range
25 Hz - 130 Hz

Filter Defeat Function
Yes

Polarity
0 or 180 degrees

Phase
Variable, 0- 280 degrees, referenced to 80 Hz

Extreme Low Frequency (E.L.F.) Trim
N/A

Line Outputs
Stereo or Mono (two RCA jacks), High-Pass or Pass-Through

Output to Slave
N/A

Calibration Mode
N/A

Physical Specifications:
Width (W)
13.5 in / 343 mm

Height (H)
14.24 in / 362 mm

Depth (D)
16.51 in / 419 mm

Net Weight
52.7 lb / 23.9 kg
Note: Height dimensions include feet.

Recently viewed